KNO3 and Chlorine ?
#1
Posted 05 November 2004 - 07:32 AM
It smells of Cl. It's like that smell like in the swimming pools.
Is it supposed to smell of Chlorine or something else.
My first batch of KNO3 was odorless.
Anyway to test if it really is KNO3.
Take care
#2 Guest_Daniel Scott_*
Posted 05 November 2004 - 12:56 PM
#3
Posted 05 November 2004 - 04:31 PM
seriously I have now idea, but is there no other way to test than that david sad? because I don't know where to get or dear to use high concentrated H2SO4...
#4
Posted 05 November 2004 - 05:29 PM
Here is W.V's chlorate and perchlorate page, which has pictures of these compounds on.
Finally do a flame test. Potassium compounds should, of course, turn the flame purple.
#5 Guest_Daniel Scott_*
Posted 05 November 2004 - 11:05 PM
If you melt KNO3 in a test tube and throw a match stick and all into it, the head will light and the wood will be burnt and consumed. I suppose chlorates do that as well
#6
Posted 06 November 2004 - 12:07 AM
There is also quite a simple test to ascertain that it is indeed a nitrate. Take a small amount of your chemical and mix it with a small amount of iron(II) sulphate. Make up a saturated solution of this in a test tube and gently drip some concentrated H2SO4 down the side of the tube - it will sit at the bottom of the tube. If a brown ring forms at the interface of the two layers you have a nitrate.
To determine if there is a chloride present mix a small amount of you sample with a small amount of manganese dioxide and add a little concentrated H2SO4. If there is chloride present chlorine will be liberated and this can be detected by wafting some towards your nose (carefully) or it will bleach damp litmus paper.
Warning: If you suspect the salt is a chlorate or perchlorate DO NOT add concentrated H2SO4 as it will form an explosive gas or solution.
You can probably test your KNO3 in a small amount of composition to find out if will work however I am not sure how a small amount of chloride contamination will affect it. I think that sodium chloride acts as a flame retardant and would imagine that this would be the case for other some of the other chlorides. Maybe someone else will know.
Also how dry is your KNO3 - has it been exposed to a lot of moisture.
Rich
Having thought about this a little more rationally in the morning without having had a few drinks it is unlikely to be a chloride that is the problem. It could however be a hypochlorite salt which can give off chlorine in the presence of any ammonia that could be formed by the reaction of nitrate ions with other impurities.
I do not know how a hypochlorite impurity would affect a composition however I seem to remember Big G advising against using it in a composition when it was suggested as a chlorine donor. Also I can't find a test for hypochlorite in my notes you could probably try adding a few drops of ammonia to a small amount to see if chlorine is given off.
Edited by richard2, 06 November 2004 - 08:33 AM.
#7
Posted 06 November 2004 - 05:10 AM
Also how dry is your KNO3 - has it been exposed to a lot of moisture.
It's sealed in a Air tight container
#8
Posted 06 November 2004 - 07:20 PM
The easy test (if a bit crude) for this would be to put a layer of Potassium Nitrate in a shollow dish. Add some cold water so it just covers the Potassium Nitrate. Blow away any air until the area is clear of Chlorine and the water will stop any more getting to the air. Then add some Hydochloric acid and stir it a bit. It bubbles are formed and the gas smells like Chlorine, you probably have some Hypochlorite there. If nothing is given off, then you probably dont have any Hypochlorite in it.
#9
Posted 07 November 2004 - 05:52 PM
#10
Posted 28 January 2005 - 11:40 PM
#11 Guest_Daniel Scott_*
Posted 29 January 2005 - 09:57 AM
#12
Posted 01 February 2005 - 03:36 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users