Just pressed a few 10mm end burners and a 10mm whistle, all worked fine so it seems it reaches the required pressure to make a solid fuel grain and nozzle.
Edited by pyromaniac303, 20 September 2008 - 09:01 PM.
Press
Started by Pepsi, Mar 29 2006 10:08 AM
46 replies to this topic
#46
pyromaniac303
-
- UKPS Members
-
- 632 posts
Member
Posted 20 September 2008 - 08:59 PM
Just thought I'd let everyone know, drill presses are now only £10 at Netto this weekend, I use mine for pressing rockets and whistles when I dont require a very high pressure (probably about 1 ton max if I had to hazard a guess). Unsure if its high enough pressure for pressing BP, I use my 6 ton hydraulic press for that. Its far cheaper than an arbour press, and also has a good movement range, seems ideal, its a similar design to the one BigG was using for his rocket demonstration at the convention.
Just pressed a few 10mm end burners and a 10mm whistle, all worked fine so it seems it reaches the required pressure to make a solid fuel grain and nozzle.
Just pressed a few 10mm end burners and a 10mm whistle, all worked fine so it seems it reaches the required pressure to make a solid fuel grain and nozzle.
You can never have a long enough fuse...
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
