Hi. I was wondering if mixing chemicals etc in a room where you are a lot of time of the day is OK? The particles of example the aluminum powder I have is 2-3 micron, which is something like cigarette smoke. Now, I am just thinking.. wont it float around for a while like cigarette smoke? You can smell Cigarette-smoke for quite some time after someone smoked - isnt this particles floating around? So my concern is that maybe, it could be the same with aluminum. And since I dont sit in the room with a particle filter on all day, I would rather just do it in the garage..
Please tell me your opinions
The Area Where I "work" With It?
Started by Christian, Feb 26 2008 04:55 PM
3 replies to this topic
#1
Posted 26 February 2008 - 04:55 PM
#2
Posted 26 February 2008 - 05:05 PM
get a Fume Cupboard if you want to do it indoors.
and yes, you`re Quite right, No it is NOT good for you!
and yes, you`re Quite right, No it is NOT good for you!
"In a world full of wonders mankind has managed to invent boredom" - Death
#3
Posted 26 February 2008 - 09:21 PM
OK. Good thing I asked already. I have only made something with the fine particle-stuff three times, so no harm done
But would the garage still be bad? It is rainy outside almost every day at this time of the year, so my things could get wet... and the wind would probably hurl a lot of stuff into the air?
But I am right that no harm is done by these few times right? It was just 3, 6 and 10 grams of flash powder. Dont worry, I am not going to go over 10 gram at a time (about the sensitivity - not really related to this..)
But would the garage still be bad? It is rainy outside almost every day at this time of the year, so my things could get wet... and the wind would probably hurl a lot of stuff into the air?
But I am right that no harm is done by these few times right? It was just 3, 6 and 10 grams of flash powder. Dont worry, I am not going to go over 10 gram at a time (about the sensitivity - not really related to this..)
#4
Posted 09 March 2008 - 12:04 AM
blue pencil
Edited by al., 10 March 2008 - 11:34 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users