Labels
#1
Posted 19 March 2008 - 03:50 PM
#2
Posted 19 March 2008 - 10:48 PM
It's not 100% optimal, but it does the job for me, because I can see what chemical it is, what grade, and which hazard symbols the chemical have.
I print the labels on adhesive paper with a layer of protective covering. I then cut them out as I need them.
I also print the hazard symbols and cut them out for each chemical, and stick 'em onto the label.
If you (or anyone else for that matter) are interested, I can design you a label.
#3
Posted 20 March 2008 - 09:37 PM
It's avaible at www.tofoq.de (Sorry, the English version of the page is outdated, but I suppose the German version is understandable, too).
I'd like to get some feedback if it works or if there are any problems.
The last build of the program is dated 2004, so I might be rewriting the code if there are any problems.
Edited by Valec, 20 March 2008 - 09:38 PM.
#4
Posted 22 March 2008 - 07:28 AM
http://www.warninglabelgenerator.com/
Go nuts
Edited by marble, 22 March 2008 - 07:29 AM.
#5
Posted 28 March 2008 - 10:14 PM
#6
Posted 29 March 2008 - 12:16 PM
#7
Posted 29 March 2008 - 03:41 PM
#8
Posted 29 March 2008 - 05:35 PM
I label the chemicals after www.kiros.dk and under "Charcoal activated, powder" there are no symbol for flammable.
#9
Posted 29 March 2008 - 05:53 PM
From what I can tell KNO3 is about as toxic as table salt, does it really warrant a toxic sticker?
that May be true for Some, but it`s not Fact.
the fact is that it can in a few be turned to the nitrIte and result in Death due to methemoglobin formation.
ergo, it gets a Toxic sticker.
your Charcoal is marked as `Airfloat`, ever seen an FAE?
Custard powder is the Usual demo for this phenomenon, there are probably countless youtube vids to this effect.
ergo it gets a Flammable sticker.
Edited by YT2095, 29 March 2008 - 05:54 PM.
#10
Posted 29 March 2008 - 11:39 PM
It's possible to make flour explode, sugar burns. Should these then be labelled flammable in the home.
Seriously I think sometimes labelling can be a bit over the top. I'm not trying to say that if you possess anything dangerous it should not be labelled appropriately and chems should definitely always be identifiable by a label however just because it is possible to make say, charcoal burn quickly should it then be labelled flammable?
Regards
Rich
#11
Posted 30 March 2008 - 02:33 PM
Steve
#12
Posted 30 March 2008 - 11:56 PM
#13
Posted 31 March 2008 - 11:19 AM
I asked a doctor friend what chronic Perc contamination would do to me over time and Pernicious Anemia, with red blood cell production permanently shutting down in the larger bones of my body was scary enough to make me believe them...
Edited by BrightStar, 31 March 2008 - 12:29 PM.
#14
Posted 31 March 2008 - 12:47 PM
#15
Posted 01 April 2008 - 02:59 PM
At the moment i'm working on some for other chemicals, ths is the first one
http://www.mediafire.com/?2rmxyymtpgf
Tell me what you think, is it suitable?...Please feel free to change it, if necessary
Dean
Edited by portfire, 01 April 2008 - 03:05 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users