Firing From Rooftops, City Centre
#1
Posted 26 October 2008 - 09:36 PM
anyone care to share there best practises?
www.impacttechnical.co.uk
#2
Posted 26 October 2008 - 10:07 PM
Work at Height regs may suggest a work positioning harness and lanyard are appropriate. Assume that the wind will be much greater than at ground level don't leave ANYTHING that could blow off the top!
Edited by Arthur Brown, 26 October 2008 - 10:22 PM.
Keep mannequins and watermelons away from fireworks..they always get hurt..
#3
Posted 27 October 2008 - 07:26 AM
http://pyrotech.com/haz_assess_LM.htm
I know its american, but all roofs are the same arent they?
#4
Posted 27 October 2008 - 11:06 AM
just wanted to know if theres any pitfalls etc..
www.impacttechnical.co.uk
#5
Posted 27 October 2008 - 07:15 PM
Keep mannequins and watermelons away from fireworks..they always get hurt..
#6
Posted 27 October 2008 - 08:21 PM
i MUST add this is a show comprising of 3 cakes and 9 candles.... not a huge thing...
just wanted to know if theres any pitfalls etc..
I would place the candles in buckets of sand,place the cakes on thick board and secure with duct tape etc,and make sure you have a couple of buckets of water ready,just in case the cakes catch fire after fireing.
#7
Posted 27 October 2008 - 09:08 PM
Should not be much of an issue with the size of event you plan, but with big events, must be a major headache (literally!)
If one side or the other of your building has an area free of people, angle your material so that debris will fall that way (unless your roof is so big that the debris will be contained by it).
thegreenman
#8
Posted 27 October 2008 - 09:30 PM
Plenty of fire extinguishers on hand and people who know how to use them. Ideally the whole roof should be covered in a layer of sand so hot fallout can't start a fire.
Inform the fire brigade that you are doing this so if they get a call that the roof is on fire, they know people are likely to be on it. Also damp down with a hose afterwards even if all looks ok.
#9
Posted 28 October 2008 - 08:33 PM
What no one has mentioned is fallout...
Should not be much of an issue with the size of event you plan, but with big events, must be a major headache (literally!)
If one side or the other of your building has an area free of people, angle your material so that debris will fall that way (unless your roof is so big that the debris will be contained by it).
I must admit Phill,
i did not mention this as i thought it was basic common sense and the first thing you would consider.
#10
Posted 28 October 2008 - 09:09 PM
I believe most 'stadium' type events now use 'zero fallout material'. Also used in stage pyro.
thegreenman
#11
Posted 29 October 2008 - 06:25 PM
www.impacttechnical.co.uk
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users