Jump to content


Photo

firework display at a wedding (scotland)


  • Please log in to reply
18 replies to this topic

#16 Mixologist

Mixologist

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 284 posts

Posted 08 April 2009 - 10:18 AM

Not a bad display i think.

What calibre were the mines? As they had no safety fountain and about a 4 second fuse from when you lit them i wonder if they are Cat4? Quite a few of those items looked to be Cat 4 to me actually?

If you can find someone who will do it like this for you then your onto a winner as you will get a little more pyro for your money than pro`s, again tho, no shell finale.

#17 Spyrotechnics

Spyrotechnics

    Fireworks Lover

  • General Public Members
  • PipPipPip
  • 664 posts

Posted 08 April 2009 - 03:36 PM

As they had no safety fountain and about a 4 second fuse from when you lit them i wonder if they are Cat4


you can get Cat3 mines that don't have a fountain start, but they will still have to have the standard Cat3 delat fuse, perhaps a little video editing has been done to snip out any "gaps" in the display :)

#18 David

David

    Moonlight Shadow

  • General Public Members
  • PipPipPipPipPip
  • 2,406 posts

Posted 08 April 2009 - 03:54 PM

If you can find someone who will do it like this for you then your onto a winner as you will get a little more pyro for your money than pro`s, again tho, no shell finale.


Only drawback here might be insurance.

That said, lots of people do Cat 3 at weddings.

Edited by David, 08 April 2009 - 03:55 PM.

OK, interest in fireworks to be resumed in the spring. It usually is. ;)

#19 patrickescotland

patrickescotland

    Member

  • General Public Members
  • PipPip
  • 21 posts

Posted 08 April 2009 - 04:56 PM

I did edit out some of the gaps, a few 5 second delays and approx 20 seconds while I "walked" down the steps to the river bank to light the finale cakes. I also reduced the duration of fireworks like the roman candles and fountains that went on for a minute or two.

The mines were all around 70-80 mm diameter, and had a visco fuse leading to the quick match. The price of the mines was £51 for 5 so @ a tenner each they seemed like very good value and had some nice effects. I particularly liked the silver tourbillions and red stars/crackle effects.

I used cable-ties (3 heavy duty outdoor) to strap the mines to individual wooden posts, hammered deep into the ground. I hope to build some racks for the mines in the future.

One of my other favourites is the bengal lights (colour or strobe) - a row of these by the riverbank and under trees would give a nice quiet effect. I think a (~200 people) wedding does not neccessarily have to have lots of noisy shells and cakes, a few spectacular effects are what people want and 5-10 minutes is probably enough.
The flame that burns half as long burns twice as bright...




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users