Jump to content


Photo

Star Formulas


  • Please log in to reply
633 replies to this topic

#346 portfire

portfire

    Pyro Forum Top Trump

  • General Public Members
  • PipPipPipPip
  • 1,231 posts

Posted 03 December 2007 - 06:19 PM

without BHC.


Doh!! Sorry guys :blush:
"I reject your reality and substitute my own" Adam Savage

#347 KarlosH

KarlosH

    Member

  • General Public Members
  • PipPip
  • 55 posts

Posted 04 December 2007 - 09:33 AM

Thanks.
OK, but I know this. I have Shimizu book in my computer. Potassium dichromate(CrVI) is a disgust. Make a furuncles, is cancerogenic, and I dont want no one atom in my bellows. http://henryk.borec.cz/Chrom/kuze.jpg
Pyrotechnics is dangerous hobby, mainly chemicals and their small particles in the air. I have respirator but I am still worry.
Benzene hexachloride BHC is dangerous too (volatile).
I want know any new good green composition with(etc. PVC, palron). Barium nitrate based comp.
I thing, that new compositions are mixed without dangerous dichromates and others chemicals, which are cancerogenic....or not???? I dont know!

On the video are fantastic green strobing shelles. What do you thing? Which kind/type of strobe composition is this? Strobing have a low frequency....maybe. Hm...
Sorry for my language....

http://n-joy.cz/vide...xckJc6zEC30adN/

Bye.

Edited by KarlosH, 04 December 2007 - 09:40 AM.


#348 W.P

W.P

    Member

  • General Public Members
  • PipPip
  • 124 posts

Posted 04 December 2007 - 07:31 PM

A green strobe? They looks incredible to say the least! The composition must be insanely difficult to replicate.

#349 bengal_pyro

bengal_pyro

    New Member

  • General Public Members
  • Pip
  • 4 posts

Posted 05 December 2007 - 08:06 PM

This book contain many formulas, including those for stars...and some compositions looks novel(or rather old? like use of Mica or barium benzoate)

The Preparatory Manual of Black Powder and Pyrotechnics By Jared Ledgard
Some pages are available from google books:

Check the following page

http://books.google.co.in/books?id=370UwG8CuNwC&printsec=frontcover&dq=pyrotechnics&sig=fykCO-0c8VVjzRtQBf_S1csKkyY#PPA481,M1

and for some more interesting stuff

http://books.google.co.in/books?id=370UwG8CuNwC&printsec=frontcover&dq=pyrotechnics&sig=fykCO-0c8VVjzRtQBf_S1csKkyY#PPA451,M1


#350 Deafaid

Deafaid

    Member

  • General Public Members
  • PipPip
  • 12 posts

Posted 07 December 2007 - 02:42 PM

I need to know if someone has tried this formula: (you can find this formula on passfire)

Ruby Red MgAl

strontium nitrate - 50
parlon - 18
magnalium, granular, -325mesh - 12
potassium perchlorate - 8
charcaol airfloat - 5
sulfur - 5
dextrin - 5
red gum - 2

Replace parlon-->pvc?

thanks in adv.

#351 johndee

johndee

    UKPS Secretary

  • General Public Members
  • PipPip
  • 83 posts

Posted 07 December 2007 - 08:16 PM

I have tried the Ruby Red MgAl formula, it produced a nice bright deep red with a good burn time.

#352 MDH

MDH

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 742 posts

Posted 07 December 2007 - 09:11 PM

I believe paraffin can be used as an effective delay agent for green strobes, perticularly simple ones (BaNO3/MG/PVC finely powdered) in combination with a binder. The perportions are a little weird.

#353 KarlosH

KarlosH

    Member

  • General Public Members
  • PipPip
  • 55 posts

Posted 28 January 2008 - 09:23 AM

Hallo. What is this effect?

Maybe wariation of crackling? Bye. Thanks.

#354 MDH

MDH

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 742 posts

Posted 04 February 2008 - 03:10 AM

Gold matrix comets with a lot of dragon eggs.

#355 Zinginex

Zinginex

    Member

  • General Public Members
  • PipPip
  • 155 posts

Posted 10 February 2008 - 12:14 PM

Is it possible to prime stars after they have dried. I made some KNO3+sulphur+al stars but didn't bother to prime them. Now they need priming and im wondering if i could just wet them a bit now and roll them in meal.

#356 Bonny

Bonny

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 538 posts

Posted 10 February 2008 - 09:54 PM

Is it possible to prime stars after they have dried. I made some KNO3+sulphur+al stars but didn't bother to prime them. Now they need priming and im wondering if i could just wet them a bit now and roll them in meal.



That will work just fine. Don't overwet the stars. Mist them with water/alcohol and roll in meal.

#357 MMMMMM Pyro

MMMMMM Pyro

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 209 posts

Posted 10 February 2008 - 10:15 PM

Is it possible to prime stars after they have dried. I made some KNO3+sulphur+al stars but didn't bother to prime them. Now they need priming and im wondering if i could just wet them a bit now and roll them in meal.


Have you got any H3BO3 in that mix? Perhaps something to be wary of with the Al and KNO3...

3% in your H20/C6H5OH Soln. should be fine!

#358 seymour

seymour

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 691 posts

Posted 12 February 2008 - 01:52 AM

Potassium nitrate, Sulfur and Aluminium stars can be hard to light. Meal might not be hot enough. I'd step prime.
The monkey leaped off it's sunny perch and flew off into the night sky.

#359 Zinginex

Zinginex

    Member

  • General Public Members
  • PipPip
  • 155 posts

Posted 12 February 2008 - 04:25 PM

Potassium nitrate, Sulfur and Aluminium stars can be hard to light. Meal might not be hot enough. I'd step prime.

Sorry but wats step prime lol?

#360 pyrotrev

pyrotrev

    Pyro Forum Top Trump

  • UKPS Members
  • 1,112 posts

Posted 12 February 2008 - 06:45 PM

Step prime is where you put layer(s) of intermediate mixtures of the priming compound and star comp in order to give a better ignition - there's examples around the forum if you search.
Trying to do something very beautiful but very dangerous very safely....




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users