How to make nitrocellulose powder?
#1
Posted 08 May 2014 - 05:35 PM
#2
Posted 11 May 2014 - 09:27 PM
Process is freely available on the web & in books, but involves use of concentrated Nitric & Sulphuric acids & considerable work in freeing the product of residual acid (which will encourage decomposition). NC lacquers are available from pyro suppliers and some specialist paint suppliers (for old bikes & guitars!) and possibly the powder too. Much easier!
- archaic likes this
thegreenman
#4
Posted 11 May 2014 - 10:55 PM
be warned though that dope often has plasticisers and flame retardants in it too.
- archaic likes this
Click here for Cooperman435, THE online shop for chemicals, materials and tooling
Click here to email me Personally,
Click here to email Optimum Fireworks, West Yorkshire's premium Display Company
#7
Posted 14 May 2014 - 03:25 AM
There are different grades of nitrocellulose, depending on whether one, two or three of the -OH ions on each monomer are replaced by -NO3 ions. Which kind you get depends on the strength of the acid used in the process. Lacquers and ping-pong balls use lesser grades of nitration. Only the fully nitrated kind (all three -OH ions) explodes. To make this kind requires exceedingly nasty fuming acids and definitely falls into the "don't try this at home" category. What you get, however, is not a powder. It looks exactly like the material - paper, cotton, woodpulp - that you started with. To powder it, I would dissolve it in acetone, leave it in an open container for the acetone to evaporate and then rasp away the hard glassy residue with a coarse file.
Probably the easiest way to get hold of a small quantity of the powdered kind for dragons eggs, etc. is to take it out of a shotgun cartridge. Nearly everyone knows a farmer.
- archaic likes this
#8
Posted 18 May 2014 - 08:27 AM
thank you guys, you all helped me. now i know a little about it and i just want to privately chat with you. thank you again.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users