2 replies to this topic

[dave]

any recommendations for a thixotropic epoxy glue ?

 

[whoof]

Not sure what you want.
Its possible to get thixotropic additives from the fibreglass suppliers

The thinnest epoxy i know from a flow point of view is zpoxy.

[Andrew]

Thixotropic epoxys are used extensively in electronics manufacture. There are two common uses/families of encapsulant/glue, one for something called "Glob Top" encapsulation which is on the rare side and difficult to get hold of, and another that is used for glueing components to PCB's which is far more abundant in terms of easily available stock.

 

They are typically one part and themperature cure (~120 to 150 C for a couple of minutes) (and expensive per unit volume), is this what you're after; the one part / temperature cure bit? If so I can point you in the right direction. I don;t know of any two part room temperature cure ones.