Jump to content

  2. → Viewing Profile: Posts: TritonPyro

TritonPyro

Member Since 07 Jan 2013
Offline Last Active Apr 29 2015 07:05 PM
-----

Posts I've Made

In Topic: Licence to purchase chemicals - A show of hands of who would obtain one...

06 May 2014 - 06:55 PM

It has to be a good idea so we can be somewhat more legal. Also to order restricted chemicals and having the licence to do it maybe will slow the YouTube crazies. The thing that worries me is local constabulary wanting to go where there're are bangs and or suspicious neighbours. When new laws come out, do not think for a minute that the policeman in the car would know anything about it at all. You will be larger on their radar and try to argue the point with an over zealous cop. Of course, I hope for the best, but still a little ' antsy '.

In Topic: Cutters for QuickMatch?

09 April 2013 - 10:31 AM

Draper anvil cutters G804 from Amazon. Coated blade, hard plastic anvil and cut visco, time fuse ( up to 10 mm ) cleanly and with no effort. Using a sawing motion with scissors or a razor blade is asking for trouble.

In Topic: Plastic ball shell failure.

13 February 2013 - 01:13 AM

Did the small dots of glue and one piece of tape to keep bp from moving, and no problem. Thank you all for help.

In Topic: Plastic ball shell failure.

11 February 2013 - 05:23 PM

Yes, I have the adapter for 1/4 inch tf, which is glued and then hot glued to seal it. I have just picked up parts of the case and found a split case with part of the lift cup attached. Possible that is why it ruptured............tests continue tonight. Thanks for your input.

In Topic: Plastic ball shell failure.

11 February 2013 - 02:27 AM

Genuine Gamon cases. Using super glue to set fuse into spolette. Using Chinese time fuse and the failure is on the bottom of shell in area of lift cup fitting. Surprised me, as the other sizes do not seem to be a problem at all. PVC cement to put case together. Thanks for reply.

  1. UK Pyrotechnics Society Forums
  2. → Viewing Profile: Posts: TritonPyro
  3. Privacy Policy
  4. Forum rules ·