Jump to content

  2. → Viewing Profile: Topics: nickpatts

nickpatts

Member Since 06 Jan 2003
Offline Last Active Sep 13 2015 06:42 PM
-----

Topics I've Started

Ebay

10 January 2004 - 03:28 PM

Well they say you can usually get anything on ebay,well have a look at this

http://cgi6.ebay.co....&sort=3&rows=50

I cant see this guys listing lasting too long on there,whos willing to pay 4.50 for a metre of visco. Think he;ll be pulled off in a matter of time.

Nick

Tools - Rocket Spindle

03 January 2004 - 12:33 PM

Hi, I have decided to start making my own spindle on my lathe. Before I get started I thought I?d ask here for any advice you can give me or known working sizes, measurements ect. I currently looking at around using a 12mm Id tube. Can anyone give me an idea of the ideal core size,3/4mm? and length?

Thanks in advance

Nick

Rockets

31 August 2003 - 07:42 PM

Hi, after reading matts page on his rockets i decided to give it a go,all seemed well until launch time, after fuse ignited rocket i got a slight spray then a very slow take off and flight, any tips nozzle size,propellant,core depth.

some info

tubes 100mm lenght,16.5mm OD,12.5 ID, 4.5mm nozzle size with a core depth of 70mm.

using standard bp + 5% dextrin ball milled for a couple of hours.



Nick

bullet hits/body hits

27 May 2003 - 04:00 PM

well i'll start this forum of with a question which no doubt adam will know,

right what i want to know is with bullet hits/body hits is there laws/legality issues if done in a professional manor not hobbists on the amount powder/devices strapped to a person at any one time,is there any sort of control over this as i would of thought being actually attached to a person would go under alot contraints,as i would presume indoor/close proximaty fireworks go under.

Nick

[Edited on 27-5-2003 by nickpatts]

  1. UK Pyrotechnics Society Forums
  2. → Viewing Profile: Topics: nickpatts
  3. Privacy Policy
  4. Forum rules ·